Disclaimer***Acura RL V6-3.7L Technical Service Bulletin # 09-022 Date: 100720
Lighting - High Mount Brake Lamp Cover Loose/Falls Off
09-022
July 20, 2010
*Applies To:
2005-10 RL - ALL*
High Mount Brake Light Cover Is Loose or Falls Off
(Supersedes 09-022, dated June 6, 2009, to revise the information marked with the asterisks)
*REVISION SUMMARY
Under Applies To, 2010 models were added.*
SYMPTOM
The high mount brake light cover is loose or falls off.
PROBABLE CAUSE
The clips on the high mount brake light cover are incorrectly installed.
CORRECTIVE ACTION
Remove the high mount brake light cover, install the clips correctly, then reinstall the cover.
PARTS INFORMATION
Snap Fitting (clip): P/N 90666-SJA-003
WARRANTY CLAIM INFORMATION
The normal warranty applies.
Operation Number: 8570A4
Flat Rate Time: 0.2 hour
137
Failed Part: P/N 34273-SJA-000ZC
Defect Code: 08001
Symptom Code: 06101
Skill Level: Repair Technician
REPAIR PROCEDURE
1. Remove the high mount brake light cover.
2. Check for any clips that may still be attached to the vehicle body, and remove them.
3. Push the back half of the clips on the brake light cover as shown. Make sure the round side is facing outward.
NOTE:
138
If any clips are missing or damaged, replace them with new ones.
4. Reinstall the high mount brake cover, and make sure the cover fits tightly. If loose, recheck the clip installation.
