Showing posts with label A/C - Does Not Cool/Snowflake LED Lights Up. Show all posts
Showing posts with label A/C - Does Not Cool/Snowflake LED Lights Up. Show all posts

Thursday, 18 October 2018

A/C - Does Not Cool/Snowflake LED Lights Up


A/C - Does Not Cool/Snowflake LED Lights Up



SI M 64 02 05



Heating and Air Conditioning



August 2005



Technical Service



SUBJECT



Air Conditioning Doesn't Cool



MODEL



R50 (Cooper)



2002-2006 Mini Cooper (R50) L4-1.6L (W10) Page 234



R52 (Cooper Convertible)



R53 (Cooper S)



SITUATION



The customer states that the air conditioning doesn't cool. The Snowflake button LED lights up.



CAUSE



One possible cause may be a faulty evaporator temperature sensor.



PROCEDURE



1. Verify customer complaint.



2. Perform short test on vehicle and complete any test plans related to heating and air conditioning faults.



3. If the test plan does not yield a valid result, enter into BC1 (Body Control Module) control module functions and observe the evaporator



sensor reading from "Diagnosis Requests".



4. If the reading is -30锟斤拷C (normal compressor cutout threshold is 1锟斤拷C to 3锟斤拷C), this indicates a faulty sensor or high resistance in the wiring



between the BC1 and the evaporator temperature sensor.



5. Check the wiring at the BC1 for the complete evaporator temperature sensor circuit. Total circuit resistance with a good sensor should read 5



k-ohms +/- 250 ohms.



6. If reading is not within specification, measure resistance across sensor terminals.



7. If resistance across terminals is out of specification, then replace the sensor.



8. Check resistance of each wire from sensor to BC1 and repair as necessary.



9. If the sensor needs to be replaced, send the defective sensor to BMW Technical Service at:



BMWNA attention: Paul Labrie



1 BMW Plaza



Montvale NJ 07645



201 573 2100



WARRANTY INFORMATION



Covered under the terms of the BMW New Vehicle Limited Warranty.